室内膨胀型钽陶钢结构防火涂料
膨胀型钢结构防护涂料是安权霄防针对高品质钢结构建筑防火保护需求,根据GB14907-2018国家标准研制的高品质防火涂料产品。产品受火时膨胀发泡,隔绝氧气的同时,依靠材料本身的隔热性能延滞热量传递,从而有效提升钢结构的耐火极限。本产品涂层厚度薄、附着力强,具有良好的防火性能和优异的装饰效果。
关键词:
安权系列
宵防系列
安民系列
热喷涂
所属分类:
产品描述
产品名称:室内膨胀型钽陶钢结构防火涂料
产品型号:GT-NSP-Fp( )-AM02
产品简介:膨胀型钢结构防护涂料是安权霄防针对高品质钢结构建筑防火保护需求,根据GB14907-2018国家标准研制的高品质防火涂料产品。产品受火时膨胀发泡,隔绝氧气的同时,依靠材料本身的隔热性能延滞热量传递,从而有效提升钢结构的耐火极限。本产品涂层厚度薄、附着力强,具有良好的防火性能和优异的装饰效果。
|
耐火时间 |
1h |
1.5h |
2h |
2.5h |
|
涂层厚度 |
1.8-2mm |
2.1-2.3mm |
2.8-3.2mm |
4.1-4.5mm |
|
产品型号 |
GT-NSP-Fp1.00-AM02 |
GT-NSP-Fp1.50-AM02 |
GT-NSP-Fp2.00-AM02 |
GT-NSP-Fp2.50-AM02 |
主要性能指标:
|
对比项 |
国标要求 |
本产品 |
|
粘结强度(MPa) |
≥0.15 |
0.63 |
|
耐水性 |
24h试验后,涂层无起皮、发泡、脱落现象。且隔热效率衰减量≤35% |
24h试验后,涂层无起皮、发泡、脱落现象。且隔热效率衰减量11.5% |
|
耐冷热循环性 |
15次试验后,涂层应无开裂、剥落、起泡现象。且隔热效率衰减量≤35% |
15次试验后,涂层应无开裂、剥落、起泡现象。且隔热效率衰减量23.1% |
|
耐火性能 |
涂层厚度≥15mm。 整个耐火实验时间内,试件平均温度不超过538℃ |
涂层厚度3.2mm。整个耐火实验时间内,试件平均温度523.1℃ |
Product Name:Intumescent steel structure fireproofing coating for indoor
Product Model:GT-NSP-Fp( )-AM02
Product Description:Intumescent steel structure protective coating is a high-quality fireproof coating product developed by Anquan Xiaofei according to the national standard GB14907-2018 for the demand of fire protection of high-quality steel structure buildings. When the product is subjected to fire, it expands and foams to isolate oxygen, and at the same time, it relies on the material's own thermal insulating property to delay the heat transfer, thus effectively enhancing the fire-resistance limit of the steel structure. With thin coating thickness and strong adhesion, this product has good fireproof performance and excellent decorative effect.
|
refractory time |
1h |
1.5h |
2h |
2.5h |
|
Coating thickness |
1.8-2mm |
2.1-2.3mm |
2.8-3.2mm |
4.1-4.5mm |
|
Product Model |
gt-nsp-fp1.00-am02 |
gt-nsp-fp1.50-am02 |
gt-nsp-fp2.00-am02 |
gt-nsp-fp2.50-am02 |
Key Performance Indicators:
|
comparison term |
National Standard Requirements |
this product |
|
Bond strength (MPa) |
≥0.15 |
0.63 |
|
water resistance |
After 24h test, the coating has no peeling, foaming, peeling phenomenon. And the attenuation of heat insulation efficiency is ≤35%. |
After 24h test, the coating has no peeling, foaming, peeling phenomenon. And the attenuation of heat insulation efficiency is 11.5%. |
|
Heat and cold cycle resistance |
After 15 tests, the coating should be free of cracking, peeling and blistering. And the attenuation of heat insulation efficiency ≤ 35%. |
After 15 tests, the coating should be free of cracking, peeling and blistering. And the attenuation of heat insulation efficiency is 23.1 per cent. |
|
Fire resistance |
Coating thickness ≥15mm. The average temperature of the specimen shall not exceed 538°C during the whole time of the fire resistance test. |
Thickness of coating 3.2mm, average temperature of specimen 523.1°C during the whole fire resistance test time. |
相关产品
产品咨询
